HK-310B Hot Selling Gravure Ink Printing Proofer Gravure Ink
Proofer
The gravure spot color proofing machine is designed and produced by
imitating the working principle of the printing machine. The
proofing machine has adjustable pressure and a wide range of
substrates. It is suitable for packaging printing production, paper
production enterprises, ink production enterprises, scientific
research institutions, and other departments. use. Spot color
proofing machine scientifically predicts the hue of the ink
accurately through standard proofing. By constantly comparing the
color of the standard sample to determine the correct ratio of the
ink, the correct color tone is matched and then mass-produced on
the printing machine according to the ratio, so that the color
matching work is completely converted to prepress work.
Standards:
ISO 8791-2 Paper and board — Determination of roughness/smoothness
(air leak methods) — Part 2: Bendtsen method
ISO 8791-4 Paper and board — Determination of roughness/smoothness
(air leak methods) — Part 4: Print-surf method.
Technical Parameters:
| Screen plate depth | a gradient plate is standard depth: 20um, 25um, 30um, 35um, 40um,
45um, 50um, 55um, anilox roller (can also be customized according
to customer needs) |
| Color bar size | 66X56mm / P, 8 groups in total, two in each group, 16 in total |
| Operation method | touch screen control |
Power configuration: equipped with high-precision servo motor,
using Japanese technology servo system
Embossing method: Embossing in a circular manner
Printing pressure: air pressure adjustment, 0-0.90MPa adjustable
Printing speed: 0-100m / min adjustable
Air-drying configuration: double fan air drying
Rubber roller pressure method: pneumatic pressure
Squeegee pressure method: pneumatic pressure
Sample transport: equipped with sample transport device
Sample receiving: Equipped with sample receiving device
Prepress position adjustment: configure automatic reset sensor
system
Anilox roller: can quickly change anilox rollers of different
styles
Gray: 20%, 30%, 40%, 50%, 60%, 70%, 80%,
90%, 100%. Can be customized according to customer requirements.
Depth: 20um, 25um, 30um, 35um, 40um, 45um, 50um, 55um, can be
customized according to customer requirements.
Dimensions: 750X500X300mm
Net weight of the whole machine: 80KG
HK-310C Gravure ink proofer can print gravure inks quickly under the
experiment condition,and the method is closed to the actual
printing. The gravure ink proofer is used to laboratory
production,ink printability test and ink product research.It adopts
flat intaglio printing work directly for quick proofing in a varity
of flexible substrates(such as plastic film,paper,etc.).It is so
easy to operate.The machine is supplied with a special version of
the gravure proofing.
Purpose:
(1) It is suitable for the production of printed samples and
computer color matching samples that require good reproducibility.
(2) Make the company's own product color chart.
(3) Research and development of ink products.
(4) Inspection of incoming ink
Scope of application:
1. The laboratory quickly prepares the gravure ink coating sample
2. Simulate the actual printing method
3. With engraving intaglio, a variety of optional styles are
available
4. Suitable for all kinds of flexible proofs (film, paper, etc.)
Technical Specification:
| Electrical Power Source | 20V/50HZ |
| Random gravure | 150 lines/inch (A, B, C, D version are optional) |
| Sample size | 120*240mm (recommended) |
| Weight | 26kg |
| Concave sample range | 95×149mm |
| Roll/Hardness | 76*130mm/shoreA55 |
| Printing Speed | 20/30/40/45m/min (four gears optional) |
| Printing Length | 95*149mm |
| Dimension | 500*400*350mm |
Standard configuration:
Host machine *1
Accessories:
Proofing version *1 piece
Scraper*1
Power cord *1 piece
Instruction manual *1
Advantages:
Even ink mode:
1. The ink leveling speed can be switched between automatic and
manual, suitable for different operating habits and special
situations;
2. Set the soft start mode for intermediate positioning and
non-concatenating in series, reduce the unevenness of color
development and ink flying phenomenon, and improve the precision of
color development;
3. Four-stage ink leveling mode time setting (each segment can be
set to 0-200 seconds), can be set to any ink leveling mode:
positioning in series, intermittent close, fixed close and
automatic speed change
More accurate and user-friendly; 4. Ink leveling pressure
(automatic): can be automatically adjusted according to the rubber
roller wear condition or the error of the old and new rubber
rollers.
5. Color development pressure (automatic): automatically adjusted
according to the color development material thickness (-1 ~ +1 mm),
more accurate and convenient.
6. Cleaning: The metal roller does not move in the cleaning mode,
which is safe and convenient.
7. Rubber roller: Standard and UV dual-purpose roller is standard.
FAQ 1. Are you a factory or trading company?
We are a factory.
FAQ 2. Can you supply OEM?
OEM is available.
FAQ 3. What's the MOQ ?
(1). MOQ is 1 piece. The disposable supplies order usually at least
1 box.
FAQ 4. How about the order processing and lead time?
After order confirmation and receive the advance payment, we will
prepare the machines and goods. Usually could ready within 10
working day, when dispatch, will inform client and send the
documents for client making import customs clearance.
FAQ 5. What quality will be ensured?
100% new and quality inspection before delivery from factory.
Stable export box for good package.
FAQ 6. Can you guide the working?
The machine will deliver with English display, English manual and
video for installation and operation.
FAQ 7. How can your engineer replace parts if they are not beside
the machine?
Bonnin’s engineer could provide the solutions by email and video.
In warranty period, we can send spare parts for free and life-time
technical support for spare supply.
